Sea and Shore in Dundee - Marine Supplier - Boats - Engines

Storage and Seating

Bow Dodger/Bag Kit

Water-repellent, dark blue Cordura® nylon bag closes with a non-corrosive nylon zipper and hangs under the dodger. Easy to attach.

Under-Seat Storage Bag

Fits all Quicksilver Inflatables except 200 and 240 models. Handsome, colour-co-ordinated storage bag of water-repellent, dark blue Cordura Nylon. Durable construction for long life.

Adjustable Storage Seat with Cushion

25cm x H x 46cm D x 69cm to 84cm W padded storage seat easily adjusts for use on 240 to 340 models. Easy to install and remove.

Inflatable Thwart Seat

Roll-Up, Sport, AirDeck 230 to 260

Sport, AirDeck 270 to 340

Heavy-Duty 380

Grey in colour, there's an inflatable thwart seat to fit every Quicksilver Inflatable model except the 430.

White Vinyl Seat Cushion

Model 230, 240 and 260 76cm

Model 270 - 340 86cm

Model 380 102cm

Model 430 112cm

Air Pumps

Bravo 220/280 Automatic Inflator/Deflator

Features an automatic shut-off when pressure reaches 200mb, with manual override for additional pressure if needed. 220 volt.

Halkey-Roberts Valve Fill Adapter

For hose diameter 19mm

For hose diameter 14mm

Fits old style valve

For hose diameter 19mm (New style valve)

Universal Fill Adapter

For hose diameter 14mm

Fits old and new style valve

Bravo 6 Double-Action Air Pump

This easy-to-use, double-action hand pump is much faster than a standard foot pump. Use either single action (pumps when pushing) or double action (pumps on both the pull and the push)

Bravo 12v Automatic Inflator/Deflator

Works off your car's battery to provide up to 300 mb pressure. Auto shutoff prevents over-pressure. Supplied complete with universal adapters including valve and battery connectors. Makes inflating your boat a breeze on the beach.

Fuel Tank

Fuel Tank Hold Down Kit

Made with polypropylene strapping for superior strength and appearance. Quick-release buckles simplify replacement of container.

Lighting

Attwood Clamp-On Stern Light

This 61cm-high all-round light is designed for inflatables and other small craft that do not have permanently mounted navigation lights.

Attwood Combination Bow Light with Attachment Base For Inflatables

Battery-operated bow light designed for inflatables or other surfaces where screws cannot be used.

Mooring

Inflatable Boat Anchor

Designed specifically for safe and easy use with infltable boats. A mushroom anchor in a choice of three weights, coated in black plastisol.

3.6Kg Models 200-270

4.5Kg Mopdels 300-340

6.8Kg Models 380-430

Anchor Line

Three-strand polyester with thimble (40m) 10mm

Three-strand polyester with thimble (40m) 12mm

Covers

Boat Cover

Model 200, 230

Model 240, 260, 270

Model 300, 310, 330

Model 340

Model 380

Model 430

Rip-stop nylon with UV inhibitors and water-repellent ZEPEL® finish protects your inflatable from sun, rain and debris. Also fits over attached engine.

Engine

Spray Deflector

Spray deflector helps prevent engine spray from entering boat. Easy to install.

Easilift® Motortote

Provides a removable, secure handle for raising and lowering an outboard engine. Can be left in place permanently. Fits outboard motors up to 15 H.P.

Hydrofoil Stabilizer Kit

For Mercury®, Mariner® 6 h.p to 25 h.p engines. Designed to enhance performance - quicker planing, better acceleration.

Trailering

Wellington Puritan Boat Trailer Tie Down

3.05M-long, 5cm-wide webbing with the strength, but not the stretch, of nylon. Helps prevent strap loosening while trailering.

Dinghy Dolly Launching Wheels

For all Quicksilver series models. Wheels roll easily over firm surfaces, and tuck out of the way once boat is in water.

Raft Runner Launching Wheels

For all models except Rhino® Series. Wheels roll easily over firm surfaces, and tuck out of the way once boat is in water. Will not rust, corrode or deteriorate.

Repair Accessories

Boat Handles

(a) Grey

(b) Black

Additional handles make lifting easier. Mount them anywhere on the boat for convenient handholds. New model handle (c) doubles as a cleat.

Combination D-Ring and Lifting Handle

Backed by rugged 1100 decitex denier fabric. Ideal for any inflatable boat.

Stainless Steel Rings

Small black

Large black

Large Grey

These stainless steel rings can be added to inflatables for petrol-tank-tie-downs, lifting rings and securing gear.

Moulded Rope Holder

Black

Grey

Backed by rugged 1100 decitex denier fabric. Ideal for any inflatable boat.

PVC Repair Kit

Contains two grey fabric patches and one tube of cement in a waterproof plastic canister.

Seat Webbing

Web Grey - Fabric Silver

Web Grey - Fabric Grey

Web Grey - Fabric White

Web Black - Fabric Red

Used to attach additional wooden seats to tubes (two required)

M.E.K Patching Solvent and Cleaner

Used to clean inflatable tubes prior to using 2-part glue.

2-Part Glue

Sizes available:

118ml

236ml

473ml

946ml

Used to attach handles and larger accessories to inflatable boat tubes. For use on PVC and Hypalon fabric.

Seam GripT, 1oz. Tube

Excellent for minor seam or small puncture repairs. Seals and repairs in one application, dries overnight.

AquaSeal®, 1oz. Tube

Thicker than Seam Grip. Repairs small tears and cuts in inflatable boat fabrics such as PVC, Hypalon and more. Dries overnight.

Seam Grip Combo Pack

Seams seal in two hours using the combination of Seam Grip and Seam ExcelT (tack-free in 15 minutes for fast repairs)

AquaSeal Combo Pack

The combination of AquaSeal and Cotol-240T means repairs will be dry in two hours (tack-free in 15 minutes)

AirDeck Floors and Thrust Boards

Add the benefits of an AirDeck to an existing Quicksilver Series Inflatable. Airdeck as a replacement floor is available for models 230 (for 1996 models and later) to the 340. When an AirDeck is ordered as an accessory to replace wooden floorboards in an existing boat, two additional items much be purchased: 1) a double-Action Air Pump and 2.) a Thrust Board. The Thrust Board is placed under the floor to prevent the inflatable keel from pushing up under the floor.

Accessory AirDecks and Thrust Boards are available for the following models:-

230

270

300

330

330 Euro

Letter & Numbering Kits

Plastic Registration Panels

8cm H x 61cm W panels fit into slotted rubstrake of 1998 inflatables to display registration or boat name.

Hardline 76mm Letter and Number Registration Kits

Pink with purple outline gradation

Yellow with red outline gradation

Get a custom look with freehand brush styling, in either solid or sold with gradation designs.

Stencil Kit

Includes 76mm numbers and letters, surface preparation solution and black aerosol vinyl coat.

Steering

A. Pedestal Rotary Steering Kit

This floor-mounted pedestal steering unit is made of rugged stainless steel tube construction. Kit includes pedestal frame, 33cm steering wheel, bezel, rotary helm, steering cable and attaching hardware (four T-nuts, bolts and washers). Does not include control box, shift and throttle cables or attaching kits for engine.

Various lengths available

B. Spare Steering Wheel

Soft grip polyurethane steering wheel.

C. Bench Seat - White Vinyl with Attaching Hardware

66cm wide fold-back cushion seat with aluminium base and attaching hardware. Fits Quicksilver 270 and larger Sport and Heavy Duty models.

BoQsInfAccSteeringV15.jpg (112915 bytes)

A. Cross-Bar Rack Steering Kit

This adjustable-width, aluminium tube cross-bar steering unit attaches to the lacing cuffs on top of tube. Includes cross-bar frame, 33sm steering wheel, bezel, rack helm, steering cable and attaching hardware (four thumb screws, wing nuts and two backing plates). Does not include control box, shift and throttle cables or attaching kits for engine.

B. Lacing Cuff

Black

Silver

46cm lacing cuff for use with Cross-Bar Steering (two required)

C. Inflatable Bench Seat

Inflatable bench seat with back. Grey colour. Fits Quicksilver Series 270, 300, 310, 330 and 340 inflatables.